SH120 automatic
four ball machine grease wear resistance tester is in the form of sliding
friction, under the condition of extremely high point contact pressure, mainly
used to evaluate the bearing capacity of lubricants.
In practical application, different evaluation indexes
can be selected according to different uses of lubricants.
The four-ball friction testing machine can also do
lubricant long-term wear resistance test, determination of friction
coefficient, record friction and temperature curves.
The use of special accessories, can also carry out the
end face friction and material simulation test.
The machine design principle draw lever four ball
machine load stability on the basis of the characteristics of the loading of
the servo valve by servo motor, air spring, closed-loop control software to
realize automatic reset, automatic loading, automatic stay, automatic test,
automatic unloading and automatic measurement spot diameter and take pictures,
a key operation, the data storage is a key save the test speed, small error,
good repeatability, no pollution, no noise, high efficiency.
GB/ T12533-98, Lubricant extreme pressure performance
determination method (four ball machine method);
GB3142-82, Lubricant bearing capacity determination
method (four ball method);
SH/T0189-92, Lubricating oil wear resistance
determination method (four ball machine method);
SH/T0202-92, Grease extreme pressure performance
determination method (four ball machine method);
SH/T0204-92, Determination of wear resistance of
grease (four-ball machine method).
Zbe34007-87 (wear resistance test method with four
spheres)
automatic lubricant grease four ball wear testing
machine
Product
Paramenters
No.
Tech Indicator and Description
1
Standard：GB/T3142,ASTM D2783,DIN 51350,JIS K2519,IP 239,Soviet Union9490-75
2
Power: AC220V±10% 50Hz (Can be
changed to your country request)
3
Evaluate the Last Nonseizure load,
Weld Point, LWI and Anti-wear Test for Lubricating Oil,Lubricating Grease and
Cutting Solution.
4
Control the Quantity of Additives
in the Lubricating Oil,Lubricating Grease and Cutting Solution.
5
Meet Requirements in ASTM, ISO,
DIN, GB and SH/T.
6
Make the Wearing and Welding Tests
in Same Tester.
7
Use the High Precision Servo
Systems to Get Stepless Speeds.
8
Use Scar Test Method and Friction
Coefficient Test Method to Achieve the Online Test.
9
Magnify the Scar From 38 to 254
Times by Shadow Electron Microscope.
10
Assemble Weights Lifter to Save
Manpower.
11
Use the Industrial Computer and
High-end Control Card to Achieve the High Accuracy Curve.
Converted the Test Report as PDF
Format to Save and Advertise Easily.
II. Main
technical parameters:
s/n
name
Technical indicators
1
Test force
1.1
Working range of axial test force
10～10000N
1.2
relative error of the test force
±1％
1.3
When the test force is long, the
indicating error is automatically maintained
±1％F.S
2
Friction torque
2.1
Range of friction torque
measurement
0～13500N.mm
2.2
relative error of the friction torque
is shown
±3％
3
Spindle speed
3.1
Spindle frequency conversion speed
range
10～2000r/min
3.2
Spindle speed error
±5r/min
4
oil box stroke
＞45mm
5
Taper of spindle inner hole
1：7
6
Heating system of testing machine
6.1
Operating temperature range of
heater
At room temperature～250℃
6.2
Temperature control accuracy
≤2℃
7
Testing machine spindle control
7.1
Time display and control range of
testing machine
1～99999s or 1-99999min
7.2
Test machine revolution display and
control range
999999999
7.3
Maximum torque output of the main
motor of the tester
2.3N.m
8
Quantity of oil used in a test
about10ml
9
Special standard steel ball
diameter
Ф12.7
10
Dimensions of the testing machine
(length × width × height mm)
about1160×750×1640
11
Net weight of testing machine
about550kg
12
Rated power of testing machine
5.5KW
Company
Introduction
Shandong Shengtai Instruments Co., Ltd. is
specialized in the research and production of experimental testing instruments
and industrial testing instruments. It is a professional instrument company
integrating instrument research and development, manufacturing, sales and service.
Its products are widely used in food, flour, grain and oil, Feed, electricity,
petrochemical, industrial oil, aerospace, coal quality and other industries.
For more than 10 years, Shengtai has always
been adhering to the "first-class service, customer first" as the
purpose, "reasonable price, honesty and trustworthiness" as the
business policy. Adhere to technical innovation, with rich knowledge of the
technical team and experienced, thoughtful after-sales service team.
Shengtai instrument as one of the most
large-scale and competitive enterprises in the industry, with the strength of
technology research and development, professional technical knowledge and
innovative design concept, in the model improvement, Significant technical
breakthrough has been achieved in the development of function expansion and
intelligent control system.
OUR
service
After-sales service commitment, our company
to sell the product after-sales service commitment: warranty period of one
year, long-term technical support outside the warranty period. During the
warranty period, the seller shall bear the cost of the replacement of the
equipment, the freight and maintenance of the instrument; outside the warranty
period, the seller shall waive the maintenance fee and charge only the cost of
the basic materials and freight charges when the instrument is malfunctioning
and the seller shall not charge the maintenance fee during the warranty period.
